Comments (48)

By Matthieu, 2010-01-18 09:38

Update 3: For anyone looking for it: 10.6.2-IONDRVSupport.kext

Update 2: My Inspiron worked great, but took FOREVER to boot because it was “Waiting for DSMOS”. Today I finally took the time to do a quick google and found the solution:

in terminal, type “sudo chown root:wheel /” and restart

It seems the owner of the root somehow gets messed up, probably after Chameleon install (just a wild guess).
Thanks to bertmannaustria @ InsanelyMac! (Original thread)

Update: For anyone who is having problems, I have a new kext package. This is a zip of my /Extra folder that I’m using right now on my Inspiron 640m. 640mExtra-Updated Also my system is 32-bit only, so I can’t guarantee this will work in 64-bit mode.

After much trial and error, I finally found the proper procedure for installing Snow Leopard onto my Inspiron 640m. For reasons that I cannot fathom, I was unable to perform the chameleon cdboot/swap to boot from the retail Snow DVD. It might be my DVD drive, or some other cause, but I didn’t bother finding out; I just took the hard drive out of my laptop and connected it via USB to my iMac.

Here’s the procedure that I followed yesterday to install Mac OS X 10.6.0 on my Inspiron 640m. It’s tested, working and stable, everything is great except that this laptop does NOT wake from sleep. It goes to sleep just fine, just won’t wake. Here goes:

1. Remove hard drive from the Inspiron. Connect it using a hard drive dock or USB to SATA enclosure/adapter.
2. Put Mac OS X Snow Leopard DVD into existing Mac (Hackintosh or real mac, doesn’t matter).
3. Using Disk Utility, partition your Inspiron’s drive as you like, using a GUID Parition table.
4. With your Snow Leopard DVD mounted, in Finder, choose Go to folder. In the box that comes up type “/Volumes/Mac OS X Install DVD/System/Installation/Packages”.
5. This will open a folder with a lot of install pkgs. Find OSInstall.mpkg and double-click it.
6. Follow the steps to install Snow Leopard, making sure to pick the proper drive for installation.
7. Once the installation is done, eject your USB drive and put the hard drive back in your Inspiron.
8. Download the Inspiron6400.iso and burn it to a CD.
9. Power up your Inspiron and boot from the CD
10. From the Chameleon menu, use the arrow keys to select the hard drive.
11. Type the following boot arguments: -v cpus=1
12. Your Inspiron should boot into Snow Leopard. Congratulations!
13. Download my 2 Inspiron kext packages: Inspiron640mExtensions Inspiron640mExtra
14. In the Inspiron640mExtensions, you will find kext helper. Run it, and drag AppleBCM440XEthernet.kext, VoodooBattery.kext and VoodooHDA.kext onto it, enter password and install.
15. You will also find the Chameleon RC4 installer. Run it, but DON’T reboot at the end.
16. Extract the Inspiron640mExtra.zip. Copy the contents of the extracted Extra folder to /Extra.
17. Remove the Inspiron6400 CD and reboot. hopefully your laptop should boot fine from the hard drive.

Just a few notes:

• I cannot get the laptop to wake from sleep. As such, the SleepEnabler.kext is not included. I also included the InsomniaX app which you might choose to install to prevent your laptop from sleeping.
• This method seems to be update-safe. I just updated to 10.6.2 using Software Update and all is ok.
• When the clamshell display is closed, the Dell BIOS or something blanks the screen. Mac OS cannot re-enable the screen and you’ll be stuck staring at a black LCD. To circumvent this, set one of your screen corners in Expose prefs to put the display to sleep. If ever you find yourself with a black screen, move the cursor to that corner to force the display to sleep, then wake it up again.
• The Intel PRO 3945 ABG wireless card that came with my Inspiron (and all Inspirons that are branded “Centrino”) does NOT work with Mac OS X. I swapped mine for a Dell 1505 Draft-N card (cheap on eBay) that works perfectly out-of-the-box.
• The Broadcom 440x ethernet card seems to work fine, I tested it briefly with some light web browsing. However, the original thread says that the driver occasionally drops connections, so YMMV.
• Finally, a quick thanks to all the OSX86 devs. None of the kexts found here are made by me, all credit goes to the original authors. I found all the necessary info over at the InsanelyMac forum.